Intellex Ultra, DVMS, LT v4.17 Software Patch
Refer to Technical Bulletin: TB-00153-00-080514 - Intellex 4.17 Patch for more information
This software update for Intellex (running software version 4.17) addresses the following issues found within Intellex v4.17
- Activity Log audit information to accurately reflect access to the Intellex schedules and custom schedules.
- An IP text stream does not automatically restart after connection to the Intellex has been restored that was previously lost.
- Switching cameras while in pause mode in playback causes the time displayed to change by approximately 5 seconds.
- Changes implemented to address Time Zone changes in Venezuela.
- Intellex does not record changes for certain parameters in various Schedule Setup menus.
NOTE: The software patch must be applied to each Intellex unit running software version 4.17. The 4.17 Network Client patch is also required to be installed in conjunction with this Intellex Patch: Click here to download...
Intellex 4.17 Software Patch Installation Instructions:
- Using a computer with an Internet connection download the file "Intellex_417_Update_CM0002.zip" to a removable storage media device.
Note: If the Intellex has an Internet connection the file can be downloaded directly to the Intellex, follow steps 2 and 3 to exit the Intellex application then download the file.
- Exit the Intellex program by selecting Utility > Exit. When prompted "Do you wish to quit the program?" select Yes.
- At the password screen enter the pin code and select OK to exit the Intellex application.
Note: Contact Technical Support for your pin code.
- Run the "Intellex_417_Update_CM0002.zip" file from the removal storage media.
- Wait for the Installation Preparing to Install Wizard to complete.
- Click on Update.
- Wait while patch files are installed to the Intellex.
- Click on Finish to complete the installation.
NOTE: The Intellex will automatically restart.
Member Center