Skip Navigation

Video Server p1 Update

This software update for Video Server installs Video Server p1 Update. This maintenance release resolves the following issues identified in previous releases of Video Server software:

  • The security program allows access regardless of the user name and password entered. Therefore there is no way to restrict access to the Video Server GUI besides IP filtering.

Note! Before updating, please insure that the Video Server IP address has been properly configured. Failure to do so may result in loss of Video Server IP address; necessitating reconfiguration of the Video Server IP address.

For information regarding Video Server and IP addressing please refer to RVS4000 Remote Video Server Installation and Configuration Guide.

This update should only be installed on Video Server units with software version level described below.

The software level that this patch applies to is:

  • System 13.12.17
  • Application 1.3
  • Homepage & CGI 1.2
  • Active X 1.0.1.7
  • Kernel 2.4.5-rmk5-np1

The software version after upgrade will be:

  • System 13.12.17
  • Application 1.3
  • Homepage & CGI 1.2.p1
  • Active X 1.0.1.7
  • Kernel 2.4.5-rmk5-np1

Installation Instructions:

  1. Download the software onto a hard drive or disk
  2. Login to the Video Server as administrator
  3. Click on "Setting Mode"
  4. Click on "Software Upgrade"
  5. Click on "Browse"
  6. Locate the "upgrade.tar.gz" file
  7. Click "Open"
  8. Click “Update”. You will receive a message
    that the upgrade has been completed.
  9. Wait 30 seconds.
  10. Click on "System Configuration"
  11. Click on "Reboot"
  12. Wait 30 seconds.
Filename Size Date
upgrade.tar.gz 11 KB 21-Feb-2003