AD168 Release 3.30 Firmware Upgrade

AD168 software release v3.30x3 is an upgrade providing improved RS-232 keyboard communications and improved dome communications over Sensornet. Refer to the Technical Bulletin for more information

The procedure provided is comprehensive, and is meant to address all AD168 users. To complete the upgrade installation you will need four blank, formatted 3.5" floppy diskettes and the AD168 Upgrade Cable Assembly (AD168UPGR-CBL).

1. Download all four (4) executable files below.
2. Insert a blank 3.5" floppy diskette into your floppy disk drive.
3. Run the first executable file: AD168v33_Disk1.exe
4. Verify that the program will install to the proper drive. The default setting is the "A:" drive.
5. Click "Unzip" to create the floppy diskette.
6. Repeat steps 2-5 for each of the remaining executable files. Label the disks to avoid confusion during the installation process.
7. After creating the floppy diskettes, proceed with the installation as outlined in the AD168 Release 3.30 Installation
   Guidelines (PDF)

Filename	Size
AD168v33_Disk1.exe	290 KB
AD168v33_Disk2.exe	323 KB