| | | Description | Compatibility | Construction | Dimensions | |
| I-Beam Mount Assembly |  | This assembly allows the dome to be suspended from an I-beam; and includes a clamp, pipe tee nipple and flange. The clamp attaches to a 1.25" pipe, provided by the customer, then affixes to the pendant hardware. The housing or dome assembly also mounts to the structure. | SpeedDome Ultra Series and IP SpeedDome | Steel and Galvanized steel | 6 m [max.] x 293 x 127 mm (20 ft [max.] x 12 x 5 in) | I-Beam Mount Assembly |
| Indoor Pendant Mount |  | This mount suspends a SpeedDome Ultra or a SpeedDome Optima housing from a ceiling or horizontal surface. It can be installed using either 1.25" NPT threaded pipe or rigid conduit, new or existing, up to 10' (3 meters) in length. | SpeedDome Ultra, Optima Series and IP SpeedDome | Powder-coated aluminum and ABS plastic | 115 x 120 x 120 mm (4 .5 x 5 x 5 in) | Indoor Pendant Mount |
| Hard Ceiling Bracket |  | This bracket enables the Top Hat housing to be recessed in the ceiling (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat and installed in a hole cut in the ceiling — perfect for sheet rock, plaster or solid ceilings. The hard ceiling bracket can be installed entirely from below the ceiling; the installer will not have to access the area above the ceiling to install it. | SpeedDome Ultra Series | Galvanized steel | 212 x 179 x 56 mm
(8 x 7 x 2 in) | Hard Ceiling Bracket |
| Fixed Bracket |  | Used with the RHIUTH Top Hat, this bracket enables the housing to be recessed in the ceiling or in a 2-foot drop ceiling tile. The bracket is mounted to the Top Hat housing and installed in a hole cut in the ceiling. The bracket distributes the weight of the dome and Top Hat housing across the T-bar framework of the ceiling. It is also very useful for sheet rock, plaster, or solid ceilings. | SpeedDome Ultra Series | Galvanized steel | 180 x 632 x 100 mm
(7 x 24 x 4 in) | Fixed Bracket |
| Adjustable Bracket |  | Used with the RHIUTH Top Hat, this bracket enables the housing to be recessed in drop ceilings that utilize anything other than 2-foot grids. The bracket distributes the weight of the dome and the Top Hat housing across the T-bar framework of the ceiling and is adjustable from 632-1219 mm (24-48 in) | SpeedDome Ultra Series | Galvanized steel | 180 x 1219 x 100 mm (7 x 48 x 4 in) | Adjustable Bracket |
| Tile Mount |  | This mount enables the Top Hat housing to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the white tile mount is simply dropped in its place. A Top Hat housing and plastic base are included in the kit. | SpeedDome Ultra Series | Powder-coated aluminum and ABS plastic | 190 x 607 x 607 mm
(7 x 24 x 24 in) | Tile Mount |
| Tile Pendant Mount |  | This mount enables the pendant mount to be installed in a 2' x 2' drop tile ceiling. The Top Hat housing/dome assembly also mounts to the structure. The mounting kit includes a 2' x 2' plate and pendant hardware. The plate attaches to a 1.25" pipe, provided by the customer, then affixes to the Top Hat housing/dome assembly. If mounting a SpeedDome Optima with this model, a RHOPN ceiling pendant mount kit is required. | SpeedDome Ultra and Optima Series | Powder-coated aluminum and ABS plastic | 47 x 605 x 605 mm
(2 x 23 x 23 in) | Tile Pendant Mount |
| Tile Mount Plate |  | This mount enables the dome to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the tile mount is simply dropped in its place. | SpeedDome Optima Series | Painted aluminum | 47 x 605 x 605 mm
(2 x 23 x 23 in) | Tile Mount Plate |
| Mounting Plate - 3.5 inch x 3.5 inch |  | This mounting plate attaches the dome to a standard 3.5" x 3.5" duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure. | SpeedDome Ultra Series and IP SpeedDome | Galvanized steel | 2 x 90 x 90 mm
(.08 x 3 x 3 in) | Mounting Plate - 3.5 inch x 3.5 inch |
| Mounting Plate - 4 inch x 4 inch |  | This mounting plate attaches the dome to a standard 4" x 4" duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure. | SpeedDome Ultra Series | Galvanized steel | 2 x 105 x 105 mm
(.08 x 4 x 4 in) | Mounting Plate - 4 inch x 4 inch |
| Wall/Corner Mount - Short |  | This mounting structure attaches directly to a flat wall, inside corner or outside corner. The Top Hat housing/dome assembly mounts to the structure for a quick and easy installation. | SpeedDome Ultra Series | Galvanized steel | With dome installed 224 x 101 x 201 mm
(9 x 4 x 8 in) | Wall/Corner Mount - Short |
| Wall/Corner Mount - Long |  | This mount, 24" (.6 m), positions the dome away from the wall, enabling it to see over furniture, shelving and displays. It attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/dome assembly also mounts to this structure. | SpeedDome Ultra Series | Painted steel | With dome installed 413 x 123 x 772 mm (17 x 5 x 31 in) | Wall/Corner Mount - Long |
| Wall Mount - Short with End Cap Assembly |  | This mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance. | SpeedDome Ultra, Optima Series and IP SpeedDome | Powder-coated aluminum, ABS plastic and fiber-filled PVC | With dome installed 366 x 218 x 282 mm (14 x 9 x 11 in) | Wall Mount - Short with End Cap Assembly |
| Wall Mount - Long with End Cap Assembly |  | This mount attaches directly to a flat wall, positioning the dome away from the wall, so that it can see over furniture, shelving and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance. | SpeedDome Ultra, Optima Series and IP SpeedDome | Powder-coated aluminum, ABS plastic and fiber-filled PVC | With dome installed 366 x 218 x 282 mm (14 x 9 x 23 in) | Wall Mount - Long with End Cap Assembly |
| |